*** HSP Dip Switches ***

The default settings for the dip-switches in the printer are all off.

Epson/Standard mode
-------------------

Switch Block 1 
--------------
          OFF                      ON   
          ---                      --
1-1       Skip perforation off     Skip perforation on       
1-2       A.S.F off                A.S.F on            
1-3       Automatic paper load &   Automatic paper load &
            park on                  park off
1-4       SELECT IN ignored        SELECT IN on      
1-5       Automatic line feed off  Automatic line feed on
1-6       Unidirectional graphics  Bidirectional graphics
1-7       (character set)          (character set) 
1-8       Unidirectional NLQ       Bidirectional NLQ 
            printing                 printing


Switch Block 2 
--------------
          OFF                      ON
          ---                      --
2-1       High-bit control codes   Special characters
2-2       (character set)          (character set) 
2-3       (character set)          (character set)
2-4       (character set)          (character set)
2-5       Epson configuration      IBM Proprinter configuration
2-6       Normal print             Compressed print
2-7       11" page length          12" page length
2-8       Unslashed zero           Slashed zero


IBM Proprinter mode
-------------------

Switch Block 1 
--------------
          OFF                      ON   
          ---                      --
1-1       Skip perforation off     Skip perforation on       
1-2       A.S.F off                A.S.F on            
1-3       Automatic paper load &   Automatic paper load &
            park on                  park off
1-4       SELECT IN ignored        SELECT IN on      
1-5       Automatic line feed off  Automatic line feed on
1-6       Unidirectional graphics  Bidirectional graphics
1-7       Auto CR after LF,VT,ESC  Auto CR after LF,VT,ESC,J
           J, and ESC j disabled    and ESC j enabled
1-8       Unidirectional NLQ       Bidirectional NLQ 
            printing                 printing


Switch Block 2 
--------------
          OFF                      ON
          ---                      --
2-1       IBM character set 1      IBM character set 2
2-2       CANCEL code valid        CANCEL code invalid
2-3       1/6" line spacing        1/8" line spacing
2-4       Full-print line and      Full-print line only
            line feed
2-5       Epson configuration      IBM Proprinter configuration
2-6       Normal print             Compressed print
2-7       11" page length          12" page length
2-8       Unslashed zero           Slashed zero


Character Set Table
-------------------

Country             SW 1-1  SW 2-2  SW 2-3  SW 2-4
-------             ------  ------  ------  ------
U.S.A.              off     off     off     off
France              off     on      off     off
Germany             off     off     on      off
England             off     on      on      off
Denmark I           off     off     off     on 
Sweden              off     on      off     on 
Italy               off     off     on      on 
Spain               off     on      on      on 
Japan               on      off     off     off
Norway              on      on      off     off
Denmark II          on      off     on      off
Spain II            on      on      on      off
Latin America       on      off     off     on 




Switch Block 3  (Only for Serial/RS-232 models)
--------------
          OFF                 ON
          ---                 --

3-1       ---- Baud Rates ----- (see below)
3-2       ---- Baud Rates ----- (see below)
3-3       ---- Baud Rates ----- (see below)
3-4       XON/XOFF            DTR/Data Busy
3-5       8 bit               7 bit
3-6       No Parity           Yes Parity
3-7       EVEN Parity         ODD Parity
3-8       1 stop bit          2 stop bit


Baud Rates Switch Settings
--------------------------
Baud Rates     3-1       3-2       3-3
----------     ---       ---       ---
9600           OFF       OFF       OFF
4800           ON        OFF       OFF
2400           OFF       ON        OFF
1200           ON        ON        OFF
600            OFF       OFF       ON
300            ON        OFF       ON
110            OFF       ON        ON


